Void Viper PA System - A Complete 4000w System!
The Viper System is the ultimate in portable professional systems.
Viper’s design makes use of the latest in high performance components, giving outstanding sound quality and a very high output level. The use of lightweight materials and components has also kept the system weight to a minimum.
A Viper system comprises of two V Subs, two V 15’s and a Kryo V Amp. Like its smaller brother the Basys system, the Viper system comes complete with poles, cables and hardware accessories.
The Kryo V Amp was designed especially for the Viper system and utilises an integral control board for all the systems filtering. The control board is fully configurable and each V amp is capable of powering up to 8 cabinets in total if a larger system is required. With a total output power of 4000w’s the V Amp offers very high output, incredible sound quality and weighing in at 8Kg won’t break your back. The V Amp also comes with its own dedicated flight case.
All Viper cabinets come with metal fittings, 4 way speakons and tough kick proof grills. The V15’s multi-angled sides also allow it to be used as a foldback monitor and its 12 M8 flying points allowing for quick and easy mounting in fixed installs.
Applications
Live sound in medium size venues, Mobile disco, theatre and stage productions.
Viper Speaker Specifications
Frequency response V15: 58Hz-20KHz -3dB; V Sub: 35Hz-180Hz -3dB
Efficiency V15 99dB 1w/1m; V Sub 98dB 1w/1m
Crossover Point V15 1.7KHz passive; V Sub 80-160Hz active
Impedance V15 8 ohms; V Sub 8 ohms
Power Handling V15 500 watts rms; V Sub 750 watts rms
Maximum Output V15 126 dB cont 129dB peak; V Sub 126.5 dB cont 129.5 dB peak
Driver configuration V15 1 x 15" neo & 1 x 1.5" neo horn; V Sub 1 x 18" neo
Dispersion V15 80 h x 50 v; V Sub Omni
Protection V15 HF Electronic device; V Sub N/A
Connector 2 x 4 pole speakon
Speaker Dimensions
Height (mm)
V15 - 670
V Sub - 630
Width (mm)
V15 - 462
V Sub - 560
Depth (mm)
V15 - 412
V Sub - 600
Weight (kg)
V15 - 31.0
V Sub - 38.5
Speaker Construction
Enclosure 18 mm 13 laminate plywood
Rigging V15 12 x M8 insert + top hat + Powerdrive type 100 plate; V Sub - Top hat fitting
Finish Textured polyurethane
Grill Perforated steel with foam filter
Kryo V Amp Details
The Kryo series of amplifiers have been designed to provide the ultimate in fidelity and definition. Kryo’s R&D has been based around years of listening and comparing. Many different output topographies and supply configurations were tried until the ultimate sonic accuracy was discovered.
Reliability and consistency were not forgotten and an intensive search for the latest cutting edge components has lead to a series with unparalleled reliability. By using a state of the art super high frequency switch modulated supply, efficiency levels are extremely high and weight has been kept to a minimum. The fact that all of the series weighs less than 8 Kg is testament to the advanced power supply used by Kryo. The series also makes use of a conventional output stage, this being favoured to a digital output stage because of the overriding requirement for producing the best possible definition with maximum reliability.
Amp Specifications
Output (8Ω) 4 x 690w
Output (4Ω) 4 x 975w
Frequency response (ref 100W @ 8W) 20-20KHz (+0,-0.25 dB)
THD+N (ref 4W 1KHz) 0.05%
Crosstalk > 75 dB
Damping factor (1KHz and below)
Input sens (Vrms) 3.7/1.9/0.9V
Inputs XLR / 20 kΩ
Outputs Speakon 4 - 16 Ω
Amp Dimensions
Height (mm) 88.9
Width (mm) 483
Depth (mm) 310
Weight (kg) 8
| 
